Català Castellano English

PRODUCTS
ECO PRODUCTS

Solid Flocculants - ECOfloc

ECOfloc has been developed as a solid flocculant for wastewater treatment, both to fit the parameters of the effluent spill regulations according to adapt it to water reuse systems. It is designed to treat effluent with organic and inorganic suspended solids and organic load of colloidal origin.

Composition

The ECOfloc's composition is determined by the composition of the wastewater to be treated, depending on the load, pH, temperature etc. In each case is determined by laboratory tests, the composition and proportion of each component.

Field of Application

ECOfloc is suitable for use in any type of wastewater treatment or pretreatment for reuse processes. Its composition allows the application to wastewater with organic and inorganic solids.

Presentation

ECOfloc served in PE bags of 25kg. or in 1000lts big bags.

ECOfloc

Anti-fouling - ECOflow

ECOflow is developed as antifoulant for reverse osmosis and nanofiltration membrane systems. Allows to improve membrane systems recovery rates, preventing smudging, and dissolving the formed inorganic deposits.

Composition

ECOflow is a mixture of different carboxylic acids in aqueous solution. In each case the products dosage is fixed depending on the water to be treated load.

Field of Application

ECOflow is suitable for use in any inorganic incrustation, especially those produced by Ca2 + and Mg2 +. In concentrated form may be corrosive, so dosing equipment must be resistant to this corrosion. We recommend using stainless steel, AISI 316 or plastic and GRP, PVC and PP. ECOflow can be dosed continuously to the water supply, either in its pure form or diluted. It is completely miscible in water in any proportion. The ECOflow's dosage for installations where its dosed continuously is from 2 to 3 ppm, depending on the amount of water supply.

Presentation

ECOflow is served in drums of 25 and 110 liters of capacity, or 1000 liter plastic containers.

ECOflow

Cleaning products - ECOclean

ECOclean has been designed as an alkaline cleaner for ultra filtration systems, nano filtration and reverse osmosis membranes.

Composition

ECOclean is an alkaline solution of different polymers.

Field of Application

ECOclean 10 is suitable for use in inorganic fouling, especially those produced by Ca2 + and Mg2 +. In concentrated form may be corrosive, so the dosing equipment must be resistant to this corrosion. We recommend using stainless steel, AISI 316 or plastic and GRP, PVC and PP. We recommend working with solutions of 5% in volume that must be made with softened or osmosis water. For better cleaning is recommended that the solution to 5% by volume of ECOclean is recirculated on the same tank and the optimum work temperature is 30 to 40 ° C.
The ECOClean's dosage for installations where its dosed continuously is from 2 to 3 ppm, depending on the amount of water supply.

Presentation

ECOflow is served in drums of 25 and 110 liters of capacity, or 1000 liter plastic containers.

ECOclean